- Home
- Products
- Crushing And Screening Equipment
- Crusher
- PYF Cone Crusher
PYF Cone Crusher
It is usually used in secondary crushing and tertiary crushing. It is suitable for crushing all kinds of ores and rocks of medium and above hardness.
- 01 Production capacity: 45-336T/H
- 02 Applicable materials: granite, pyroxene, basalt, river pebble, limestone, dolomite, metallic ore and non-metallic ore, etc.
- 03 Scope of application: sand and stone field, mine mining, coal mining, concrete mixing station, dry powder mortar, power plant desulphurisation, quartz sand, etc.
-
Product Features:
-
Product Details
-
1.Large crushing force, good particle shape, high efficiency and high processing capacity
The appropriate spindle rotation speed, large eccentric distance, and a reasonable number of swings make the fine-grain content in the crushed product higher, which can significantly improve the processing capacity of the subsequent process and reduce the comprehensive energy consumption. The special-shaped crushing cavity and the formation of a high-density layer in the crushing section can produce a large number of materials with good grain shape.
-
2.Hydraulic cavity cleaning system is adopted in medium and large-sized crushers, which reduces downtime.
The piston of the clear cavity cylinder extends, and the support sleeve is pushed up from the frame support surface. The increase in the discharge gap reduces the pressure of the crusher liner on the material between it, causing the material to fall by itself or be cleared manually.
-
3.Seal with grease
The use of grease sealing is to prevent dust and grinding particles generated by the crushing operation from entering the lubrication system, so as not to damage the high-precision machine parts in the crusher, and to avoid the disadvantages of easy blockage of the water supply and drainage system and the defect of easy mixing of water and oil.
-
4.Adopt a spring insurance system
Heavy-duty spiral compression springs are used. When unbreakable materials (such as iron blocks) pass through the crushing cavity, the compression of the spring increases, and the support sleeve raises the discharge of the screen without damaging the crusher.
Working Principle:
The motor drives the transmission shaft of the equipment to rotate through the pulley and triangular belt. The transmission shaft drives the eccentric sleeve to rotate through the large and small bevel gears. The moving cone rotates through the spindle under the action of the eccentric sleeve, so that the moving cone and the fixed cone are sometimes close and sometimes away from the rolling wall. The material is constantly squeezed in the crushing cavity between the rolling mortar wall and the crusher. , impact and broken, the broken material is discharged from the lower part.
Product Parameters:
| Specifications | Model | Dischargeopeningrange
(mm) |
Max.Feedsize
(mm) |
Capacity
(t/h) |
Weight
(t) |
Power
(kw) |
| PYF900 | PYFB-0910 | 9-22 | 85 | 45-91 | 12.4 | 75 |
| PYFB-0917 | 13-38 | 150 | 59-163 | 12.24 | ||
| PYFB-0918 | 25-38 | 150 | 118-163 | 12.24 | ||
| PYFD-0904 | 3-13 | 35 | 27-90 | 13.2 | ||
| PYFD-0906 | 3-16 | 51 | 27-100 | 13.3 | ||
| PYFD-0907 | 6-19 | 65 | 59-127 | 13.3 | ||
| PYF1300 | PYFB-1313 | 13-31 | 115 | 108-181 | 21.5 | 160 |
| PYFB-1321 | 16-38 | 178 | 132-253 | 21.2 | ||
| PYFB-1324 | 19-51 | 205 | 172-349 | 21.2 | ||
| PYFB-1325 | 25-51 | 220 | 236-358 | 21.1 | ||
| PYFD-1308 | 6-16 | 78 | 82-163 | 20.6 | ||
| PYFD-1310 | 8-25 | 89 | 109-227 | 20.7 | ||
| PYFD-1313 | 16-25 | 113 | 209-236 | 20.8 | ||
| PYF1600 | PYFB-1620 | 16-38 | 178 | 181-327 | 37 | 250 |
| PYFB-1624 | 22-51 | 205 | 258-417 | 36.7 | ||
| PYFB-1626 | 25-64 | 228 | 299-635 | 36.5 | ||
| PYFB-1636 | 38-64 | 313 | 431-630 | 36.3 | ||
| PYFD-1607 | 5-13 | 60 | 90-209 | 36.7 | ||
| PYFD-1608 | 6-19 | 76 | 136-281 | 36.5 | ||
| PYFD-1613 | 10-25 | 113 | 190-336 | 36.5 | ||
| PYFD-1614 | 13-25 | 129 | 253-336 | 36.3 |
Product Instructions for Use:
Check the equipment before power-on. The connection part should be firm and there should be no loose noise. The bearing and moveable joints should be lubricated in place and not stuck. Clean up the debris in the feed port. Do not put super-hard and oversized materials in it. Manually turn down the rotor and turn it on if there is no abnormality.
After turning on the power, idling for 3-5 minutes, see if the operation is normal, there is no strange noise and shaking, and then feed the material evenly. Do not pile up the stuffing machine. When operating, stay away from the equipment, do not touch the moving parts with your hands, and do not send metal blocks and other unbreakable things into it.
If there is any abnormal noise, jamming or overheating during operation, stop immediately to check the problem; the gap between the mixing and discharge materials must be stopped, and the screw should be tightened after adjustment.
Product Maintenance:
After use, clean up the residual materials in the equipment in time, check the lubrication regularly, and make up for the lack of oil; often look at the hammer head and lining plate, and replace it if it is worn badly.
Check the screws every week and tighten them if they are loose; clean up the accumulated materials inside the equipment once a month; check the electrical lines every 3 months to avoid electrical problems.
When replacing the consumable parts, you must stop and cut off the power, and replace the debugging before using it normally. Before changing the lubricating oil, clean the old oil, wash the oil line, and add new oil. If it is not used for a long time, clean it up and do a good job of rust prevention, and put it in a dry and ventilated place.
Products
PE/PEX Jaw Crusher
It is a kind of crushing equipment with simple structure and stable performance. With its efficient crushing ability, it has become one of the core equipment for material crushing in mines and various industrial fields.
JC Series Jaw Crusher
The JC jaw crusher is designed using modern CAD technology, and all models are analysed by finite element technology to ensure that the internal stress level is within the appropriate range, which ultimately makes the JC crusher have the characteristics of high structural strength and light equipment weight.
It strengthens its own strength and reduces the self-weight of the equipment. It has the advantages of high yield, low cost, high structural strength and light equipment weight.
EC Series Jaw Crusher
Based on the development and design of various hard rock conditions, it adopts an innovative modular and non-welded frame structure, which has the advantages of economical and simple installation.
PF Impact Crusher
It is used for coarse crushing and medium crushing. It can process pressure-resistant ≤360 megapascal ore rocks. The processing volume is large, the discharge is fine, and the finished product is cubic, which is suitable for high-quality stone production in highways, water conservancy and other industries.
PY Cone Crusher
It has the advantages of high production efficiency, low energy consumption, uniform particle size of finished products, extended service life and so on.
HC Cone Crusher
The new structural design increases its production capacity by 15% compared with equipment of the same size. Under the same production capacity, the energy consumption is lower, and the operation is quiet and the life of the lining is longer, helping customers to produce efficiently.
Recent news
What precautions should be taken when commissioning a jaw crusher?
Jun 9, 2026
Focusing on tailings reuse to achieve zero-waste emissions from mines
Jun 9, 2026
Jinhua Star Machinery & Steel Casting Co., Ltd. successfully held a team building and recuperation activity for its employees.
Jun 8, 2026
See Latest Service
