PY Cone Crusher

Working Principle:

The core of the work of the PY cone crusher is the motor drive. Through the hydraulic coupler and the bevel gear, the eccentric sleeve is driven to rotate, and then the cone is pulled to make a rotary swing movement. In this way, a crushing cavity with periodic changes in size will be formed between the moving cone and the fixed cone. After the material enters from the feed port, when the moving cone is close to the fixed cone, it will be squeezed, bent and sheared, so as to complete the crushing; when the moving cone is away from the fixed cone, the crushed material will slide down the crushing cavity by its own weight, thus completing a crushing.

Product Parameters:

Product Instructions for Use:

1. Before power-on: check that the equipment is firmly connected and there is no loose sound, confirm that the lubrication is sufficient and there is no jam, clean up the debris from the feed port, and turn on the power after manually turning the rotor without any abnormality.
2. After power-on: first run empty for 3-5 minutes. After checking the normal operation, feed evenly to avoid material accumulation. Keep a safe distance between people and the equipment during operation, and do not touch the operating parts.
3. In operation: If there is abnormal noise, material jamming, overheating and other abnormalities, it should be stopped immediately for inspection. It is forbidden to send non-crushed materials such as metal into the equipment. When adjusting the gap, it should be stopped.

Product Maintenance:

1. Daily maintenance: Clean up the residual materials of the equipment after each use, check the lubrication, replenish the lubricating oil in time, and troubleshoot the wear of consumable parts.
2. Regular maintenance: check the fasteners every week, clean up the internal accumulation of the equipment every month, and check the electrical lines every 3 months to ensure the normal operation of the equipment.
3. Replacement of consumable parts: Replace the hammer head and liner in time when they are seriously worn. When replacing, you need to stop the machine and cut off the power. After replacement, the debugging is normal before putting it into use; before replacing the lubricant, you need to clean the oil line.

Application scenario:

PY series cone crusher is mainly used for medium and fine crushing of medium to high hardness ore. In the whole sand and stone production line, it is usually located after the jaw crusher and undertakes the key link of medium crushing or fine crushing. It is widely used in all kinds of mines, sand and stone aggregate production lines and metallurgical building materials industries. Because it adopts the principle of lamination crushing, it can obtain a better finished product particle shape while ensuring stable yield, so it is very suitable as the core fine crushing equipment in large-scale crushing systems.

1. Mine mining: PY cone crusher is often used for the crushing of granite, basalt, iron ore, river pebbles and other high-hardness materials, especially for large-scale mining projects that require long-term continuous operation. In this kind of working condition, it is usually used as a crushing equipment after the jaw crusher.
2. Sand and stone aggregate production industry: PY cone crusher is mainly used for the middle crushing and fine crushing of construction sand, highway aggregate and concrete aggregate production lines. Through cooperation with sand-making machines and vibrating screens, it can form a complete sand and stone production system and improve the quality and production efficiency of finished products
3. Cement plants, metallurgy and infrastructure construction projects: PY cone crushers are widely used in the secondary crushing of ores and rocks, especially suitable for production environments with high requirements for yield stability and equipment wear resistance.

FAQ：

Q：What is the role of PY cone crusher in the production line?

A：PY cone crusher is usually used in the medium crushing or fine crushing stage of the crushing production line. It is located after the jaw crusher. It is used to further crush medium-grained materials and provide suitable feed for the sand-making machine or screening system. It is an important intermediate link in the whole sand and stone production line and plays a key role in the quality of finished products and the stability of production capacity.

Q：What are the technical characteristics of PY cone crusher?

A：The PY series adopts the principle of lamination crushing, so that the material is squeezed and ground in the crushing cavity, and the finished product has good grain shape and high crushing efficiency. The structure of the equipment is stable, which is suitable for the continuous operation of high-hardness materials. At the same time, it performs well in terms of wear-resistant parts life and maintenance convenience.

Q：How to choose the PY cone crusher?

A：The selection mainly depends on the hardness, feed particle size and yield requirements of the material. Large-scale mining projects usually choose high-capacity models to meet the needs of continuous operation, while medium-sized sand and stone plants choose standard models. In practical application, it is necessary to match the design in combination with the configuration of the whole production line to ensure the overall efficiency and stability.

Q：Do you provide a long-term supply of consumable parts?

A：We supply consumable parts for PY cone crushers for a long time, including mortar walls, crushing walls and lining plates, etc. It is made of high-manganese steel or high-chromium alloy materials, which are wear-resistant, and support long-term supply of spare parts and bulk procurement to ensure the continuous and stable operation of the equipment.

Q：How to transport the PY cone crusher?

A：The equipment adopts standard export packaging, uses containers or bulk cargo transportation according to different models, and is treated with anti-rust and anti-seismic reinforcement. We can assist in shipping and customs clearance to ensure the safe delivery of equipment to the project site.

Q：Do you support agency cooperation and long-term supply?

A：We support global agency, distribution and long-term supply cooperation, and can provide factory prices and technical support services. At the same time, it has a stable spare parts supply system to help partners establish long-term competitiveness in the local market.