HC Cone Crusher

Working Principle:

The HC series single-cylinder hydraulic cone crusher relies on the motor to drive the eccentric sleeve to rotate, and then pulls the moving cone back and forth. In this way, a crushing cavity is formed between the moving cone and the fixed cone. After the material enters from the feed port, the passive cone and fixed cone are squeezed and cut, and the crushed material slides down by its own weight to complete the discharge.

Product Parameters:

Product Instructions for Use:

1. Before starting the power, check that the connection part of the equipment is firm and sufficiently lubricated, clean up the debris at the feed port, and start the equipment after confirming that there is no jam and no potential collision.
2. The feeding should be uniform to avoid the accumulation of materials. It is forbidden to send unbroken debris into the equipment to prevent damage to parts.
3. If there is abnormal noise, overheating and other abnormalities during operation, it should be stopped immediately for troubleshooting, and then restarted after troubleshooting. It is strictly forbidden to run with faults.
4. Adjust the gap of the equipment, replace the lining plate and other operations need to be stopped. After the operation is completed, tighten the fixing parts.

Product Maintenance:

1. After daily use, clean up the residual materials in the equipment in time to avoid clumping.
2. Check the lubricating oil level regularly, and replenish the lack of oil in time to ensure the smooth operation of the machine.
3. Check the wear of the accessories every week, and replace them in time if the wear is serious.
4. When maintaining and replacing parts, the machine must be stopped and the power must be cut off, and it is forbidden to operate with electricity.
5. Avoid hard metal objects from entering the equipment to prevent parts from being damaged.
6. When not in use for a long time, clean up the equipment and do a good job of rust prevention.

Application scenarios：

HC series cone crushers are mainly used for medium-fine crushing of medium-hardness to high-hardness materials. They are widely used in mining, sand and stone aggregate production lines, metallurgy, building materials and other industries. The equipment is suitable for granite, basalt, iron ore, river pebbles and other high-strength materials, and can maintain stable crushing performance under continuous high-load conditions.

(1) In the sand and stone production line, the HC cone crusher is usually located after the jaw crusher. It is used in the medium crushing or fine crushing stage to further crush the coarsely crushed materials to a smaller particle size and provide stable raw materials for the sand-making machine or screening system. It is an important equipment for connecting the coarse crushing and finished product stages in the whole production line.

(2) It is widely used in large-scale mining projects, cement production lines and infrastructure construction projects. It is especially suitable for continuous production scenarios with high requirements for yield stability, finished particle type and equipment wear resistance. It is one of the core equipment in medium and large crushing systems.

FAQ：

Q：Where is the HC cone crusher in the sand and stone production line? What’s the function?

A：series hydraulic cone crusher is a high-end secondary and tertiary fine and medium-fine crushing equipment of the production line, which is arranged after jaw-type coarse crushing and before sandmaking or screening equipment. Adopting the principle of full hydraulic adjustment and lamination crushing, it is responsible for processing coarse crushed stone into uniform, round and high-standard aggregates, effectively improving the production capacity and finished product quality of the whole production line, and reducing the needle sheet content.

Q：Why does the hard rock production line prioritise HC hydraulic cone breaker?

A：Compared with ordinary spring cone breaker and counterattack breaker, HC hydraulic cone breaker can achieve higher, lower wear, faster adjustment and stronger automation. It is a high-end preferred model for large-scale sandstone and mine projects for hard rock crushing, which is not easy to block, has sensitive iron protection, and can be reloaded for 24 hours continuously.

Q：What are the core advantages of HC hydraulic cone crusher?

A：HC series has four advantages: fully automatic hydraulic regulation, one-button discharge port adjustment, intelligent iron protection, and dustproof sealing system. Large crushing force, uniform discharge, regular grain shape, high production capacity and extremely low failure rate. The automated design greatly reduces the cost of manual operation and maintenance, and the whole machine operates stably, which is suitable for long-term high-intensity mass production.

Q：Are HC cone breaker accessories available in stock? Can the supply be stable for a long time?

A：The whole series HC series has a large number of spot inventory of the original factory wear-resistant parts and whole machine accessories all year round, and supports fast replenishment and delivery. As a source factory, it can continuously supply in large quantities throughout the year, supporting overseas agents and mining enterprises for long-term fixed stocking and annual procurement.

Q：What is the biggest difference between your HC cone breaker and peer equipment?

A：Most of our peers purchase accessories for assembly. Our factory’s core castings, wear-resistant parts and racks are all self-developed and self-produced, with higher processing accuracy, greater structural strength and longer wear-resistant life. The hydraulic system has good stability and high assembly accuracy, and is not easy to wear and deform in long-term heavy-load operation.

Q：What is the export packaging and trade mode of equipment?

A：Our company uniformly adopts FOB export trade terms, and the equipment has undergone professional anti-rust treatment, waterproof wrapping, split reinforcement, and export wooden box packaging to eliminate sea transportation bumps and rust. A full set of customs clearance materials, packing photos and shipping videos can be provided, and the export process is mature and stable.