GZG Vibrating Feeder

Working Principle:

The core relies on the synchronous reversal of two excitation motors and uses the centrifugal force generated by it to realise material transportation. When working, the centrifugal force generated by the synchronous inversion of the two motors offsets each other in the horizontal direction, and the forces in the vertical direction superimposed on each other, so that the machine produces a stable vertical linear vibration. Under this vibration, the material realises jumping forward with the vibration of the equipment, so as to complete the uniform and continuous feeding operation.

Product Parameters:

Product Instructions for Use:

1. Before starting the machine, check that the bolts are tightened and the lubricating oil is sufficient, clean up the debris of the feed port, and confirm that there is no abnormality before starting.
2. Feed the material evenly during operation to avoid overload, pay close attention to the vibration, noise and temperature of the equipment, and immediately stop and troubleshoot abnormal.
3. It is forbidden to transport ultra-standard hard materials, check consumable parts regularly, and replace them in time.
4. Empty the materials before the shutdown, turn off the power supply, and do a good job of equipment cleaning and lubrication maintenance.

Product Maintenance:

1. Check the working status of the exciter every week, check whether the seal is intact, and prevent dust from entering the damaged parts.
2. Replace the exciter lubricating oil once a month, choose the suitable model of lubricating oil, and thoroughly clean the oil cavity when replacing it to avoid the mixing of old and new oils affecting the lubrication effect.
3. Regularly check the wear of wear parts such as grids and shock absorbers. If there is wear and deformation, replace the standardised consumable parts in time to ensure the normal operation of the equipment.
4. Check the grounding and circuit connection of the motor, tighten the loose line, prevent short circuit and leakage, and ensure the safety of electricity.

Application scenarios：

The ZSW vibrating feeder is installed at the front end of the sand and stone aggregate and mine crushing production line, which is responsible for continuously and evenly conveying raw stones and large pieces of stone into the crusher. The equipment is suitable for mining, building materials, metallurgy, water conservancy and hydropower industries, and is an indispensable supporting equipment for the stable operation of the crushing production line.

(1) In the sand and stone production line, the ZSW vibrating feeder is usually located in the first process before the jaw crusher. It is used to evenly transport large pieces of stone after blasting to the crusher. At the same time, it plays the role of preliminary screening and buffering impact load, so as to improve the operating efficiency and stability of the whole production line.

(2) In mine mining, cement production and construction aggregate processing projects, ZSW vibrating feeder is also widely used, which is especially suitable for conditions that require continuous and large-flow feeding. It is an important part of realising automated production lines.

FAQ：

Q：Where is the GZG vibration feeder in the production line? What is the core role?

A：The GZG series vibrating feeder is an automated uniform feeding equipment at the front end of the production line, which is arranged under the silo and at the front end of the primary crushing equipment. It mainly realises continuous, quantitative and uniform feeding, stabilises the feed volume of the rear-end crusher, and avoids the problems of blockage, empty material and uneven feeding. At the same time, it can easily screen fine impurities to ensure the smooth and efficient operation of the whole production line.

Q：What materials are suitable for GZG feeders to transport? What are the adapted working conditions?

A：This machine is suitable for all kinds of fine, medium and medium block materials such as sand and stone, ore, industrial powder, granular materials, etc., and can stably transport limestone, bluestone, river pebble, slag, cement clinker, dry construction waste, coal and other materials. It is suitable for dry and wet routine working conditions and is extremely versatile.

Q：Why do small and medium-sized production lines prioritise GZG vibration feeders?

A：Compared with the heavy-duty ZSW feeder, the GZG model is lightweight, low energy consumption, cost-effective, low operating noise, simple debugging, suitable for small and medium-sized feeding volume, and no unnecessary power consumption waste. It is specially designed for small and medium-sized sand and stone factories, solid waste treatment and industrial raw material processing scenarios. It is the preferred model for economical automated feeding.

Q：What are the core advantages of GZG vibrating feeder?

A：The GZG feeder adopts the principle of synchronous vibration, which runs smoothly, feeds uniformly, has no jams and no biased load. It has the advantages of energy saving and low consumption, dustproof and noise reduction, compact structure, convenient installation and adjustable speed. It can accurately control the feed particle size and yield, adapt to automated production lines, and effectively improve the work efficiency of rear-end crushing equipment.

Q：What is the difference between our factory’s GZG feeder and ordinary models on the market?

A：Most of the ordinary models on the market are soldered with thin materials and stress-free treatment. Long-term operation is easy to shake and deform, and the accessories are easy to damage. The fuselage of our factory’s equipment is thickened and reinforced, the vibration parameters are accurately calibrated, and the wear-resistant parts are strengthened and upgraded. The operation is more stable, the service life is longer, and the applicable working conditions are wider.

Q：What equipment can the GZG vibrating feeder be used with to form a production line?

A：It is widely adapted to a full set of small and medium-sized production lines, which can be matched with jaw crushers, counter-impact crushers, roller crushers, vibrating screens, belt conveyors, fixed and simple sand and stone production lines, solid waste recycling production lines, and industrial raw material pretreatment production lines.